Scale Build-up.

What is It?

Limescale is the hard, off-white, chalky deposit found in kettles, hot-water boilers and the inside of inadequately maintained hot-water central heating systems.

It is also often found as a similar deposit on the inner surface of old pipes and other surfaces where “hard water” has evaporated. Other than being unsightly and harder to clean, limescale seriously impairs the operation or damages various components.

Exibit 1 Pipe Scale buildup

The type found deposited on the heating elements of water heaters has a main component of calcium carbonate. Hard water contains calcium (and often magnesium) bicarbonate and/or similar ions. Calcium salts, such as calcium bicarbonate and Calcium carbonate calcium carbonate are both more soluble in hot water than cold water. Thus, heating water does not cause calcium carbonate to precipitate per se. However, there is an equilibrium between dissolved calcium bicarbonate and dissolved calcium carbonate:

Ca2+ + 2HCO3- ⇋ Ca2+ + CO32- + CO2 + H2O

where the equilibrium is driven by the carbonate/bicarbonate, not the calcium. Note that the CO2 is dissolved in the water.

There is also an equilibrium of carbon dioxide between dissolved in water (dis) and the gaseous state (g): CO2(dis) ⇋ CO2(g)

The equilibrium of CO2 also moves to the right towards gaseous CO2 when the water temperature rises. When water that contains dissolved calcium carbonate is warmed, CO2 is removed from the water as gas causing the equilibrium of bicarbonate and carbonate to shift to the right, increasing the concentration of dissolved carbonate. As the concentration of carbonate increases, calcium carbonate precipitates as the salt: Ca2+ + CO32- ⇋ CaCO3.

As new cold water with dissolved calcium carbonate/bicarbonate is added and heated, CO2 gas is removed, carbonate concentration increases, and more calcium carbonate precipitates

Source: http://en.wikipedia.org

How the H2o Concepts Arizona Whole House Water Filter System solves your Hard Water issues.